Globe-Control-Valve_series-2200.jpg
Series 8000
Size 2” (50 mm) to 36” (900 mm)
Rating ANSI 150# to 300#
Design Code ASME B16.34
Features Wafer style connection Fully bidirectional design Minimum obstruction of owing area i.e. high capacity No internal cavity Low operating torque Seat replacement without valve disassembly Used for on-off as well as control application Low cost, light weight and space saving in combination with good ow characteristics
Applications Low pressure steam, liquid and gases service Installations where large volumes approaching full line capacity handled with low pressure drop
Body Style Wafer, Lug.
Valve Size 50 to 900 mm ( 2" to 36" )
Rating ANSI 150 # & 300#
Body Material Cast Iron, Carbon Steel, Stainless Steel etc.
Vane Stainless Steel
Body Sleeve Neoprene, Nitrile, Teflon, EPDM, Silicon, Butyl, Viton etc.
Shaft Stainless Steel, 17-4 PH
Face to Face Dimensions API 609, ASME B16.10
Pressure Temperature Rating ASME B16.34
Top Flange Drilling ISO 5211
Gland Packing PTFE V Rings upto 180⁰C, Grafoil upto 400°C
Flow Characteristic Throttling, ON-OFF.
Inspection & Testing API 598, ASME B16.34, Tight Shut Off.
Actuator Type Diaphragm, Rotary Piston, Electric.
Diaphragm Nitrile / Neoprene/ EPDM.
Spring Range 3-15 Psig ( 0.2 -1.0 kg/cm²), 6-30 Psig ( 0.4-2.0 kg/cm²)
Air supply 20-35 psig (1.4-2.5 kg/cm²)
Air Connection 1/4" or 1/2 " NPT
Globe-Control-Valve_series-2200.jpg
Series 8200
Size 2” (50 mm) to 36” (900 mm)
Rating ANSI 150#
Design Code ASME B16.34
Features Wafer style design Available with wide range of lining material i.e. EPDM/ Viton/Neoprene/Nitrile Simple and light construction Tight shut off with rubber sleeves On-off / Control application
Applications Steel, Sugar and Textile industries Slurry applications
Body Style Wafer, Lug.
Valve Size 50 to 900 mm ( 2" to 36" )
Rating ANSI 150 # & 300#
Face to Face ISA 75.03 1985 up to 600#, ISA S.75.16 900# and above
End Connection Flanged, Screwed, Butt Weld, Socket weld, T&G
Body Material Carbon Steel, Chrome- moly steel , Stainless Steel , Monel, Alloy 20 Hastelloy 'C', Nickel
Type of Bonnet Standard between-20°C to 250°C, Normalizing ( Finned ) Between 250 ˚C to 500˚C Extended cold service -20˚C to -200˚C, Extended Bellow Seals
Gland Packing Grafoil / PTFE V rings
Trim Design Top Guided Contoured, Micro Splined Flow, V-Ported (Balanced / Unbalanced), Low Noise ( LN1,LN2,LN3,LN4)
Trim Material Stainless Steel, Alloy 20, Monel, Hastelloy B/C, Stellite (Alloy 6), Nickel
Characteristic Equal Percentage, Linear and Quick Opening.
Seat leakage As per FCI -70-2 ( ANSI B 16.104 ) Class III, IV,V and VI (Standard Leakage rates) Metal to Metal Seating Class IV, Less than 0.01% of rated Cv Metal to Soft Seating -Bubble Tight (Zero Leakage)
Actuator Type Diaphragm, Cylinder or Electric
Actuator Action Direct / Reverse Acting
Diaphragm Nitrile / Neoprene
Spring Range 3-15 Psig (0.2 -1.0 kg/ cm²), 6-30 Psig (0.4-2.0 kg/ cm²)
Air supply 20-35 Psig (1.4-2.5 kg/ cm²)
Air Connection ¼" or ½ " NPT
Hand wheel Top or Side Mounted Handwheel
Globe-Control-Valve_series-2200.jpg
Series 2200-BS
Size ½” (15 mm) to 12” (300 mm)
Rating ANSI 150#, 300# & 600#
Design Code ASME B16.34 Bellow seal is the additional feature for leak-proof packing in single seated Globe 2 way and 3 way valves
Features Emission free Zero leakage from gland packing Bellows are of stainless steel, Monel, Hastelloy C & Inconel to withstand high temperature, pressure & highly corrosive applications
Applications Suitable for Ammonia, Chlorine, Hydrogen and various acids Suitable for hazardous and corrosive applications Suitable for Hot oils like Dowtherm, Therminol, Santotherm Suitable for Sulphur
Design ASME B16.34
Valve Size 15 to 450 mm ( ½" to 18" )
Rating ANSI 150 # to 2500# or Equivalents to BS, DIN, IS, JIS, etc.
Face to Face ISA 75.03 1985 up to 600#, ISA S.75.16 900# and above
End Connection Flanged, Screwed, Butt Weld, Socket weld, T&G
Body Material Carbon Steel, Chrome- moly steel , Stainless Steel , Monel, Alloy 20 Hastelloy 'C', Nickel
Type of Bonnet Standard between-20°C to 250°C, Normalizing ( Finned ) Between 250 ˚C to 500˚C Extended cold service -20˚C to -200˚C, Extended Bellow Seals
Gland Packing Grafoil / PTFE V rings
Trim Design Top Guided Contoured, Micro Splined Flow, V-Ported (Balanced / Unbalanced), Low Noise ( LN1,LN2,LN3,LN4)
Trim Material Stainless Steel, Alloy 20, Monel, Hastelloy B/C, Stellite (Alloy 6), Nickel
Characteristic Equal Percentage, Linear and Quick Opening.
Seat leakage As per FCI -70-2 ( ANSI B 16.104 ) Class III, IV,V and VI (Standard Leakage rates) Metal to Metal Seating Class IV, Less than 0.01% of rated Cv Metal to Soft Seating -Bubble Tight (Zero Leakage)
Actuator Type Diaphragm, Cylinder or Electric
Actuator Action Direct / Reverse Acting
Diaphragm Nitrile / Neoprene
Spring Range 3-15 Psig (0.2 -1.0 kg/ cm²), 6-30 Psig (0.4-2.0 kg/ cm²)
Air supply 20-35 Psig (1.4-2.5 kg/ cm²)
Air Connection ¼" or ½ " NPT
Hand wheel Top or Side Mounted Handwheel



Get in tuch with us.