Globe-Control-Valve_series-2200.jpg
Series 2200
Size ½” (15 mm) to 20” (500 mm)
Rating ANSI 150# to 2500# (Other standards available on request)
Design Code ASME B16.34
Features Precision control Emission free High powered actuator available Pneumatic as well as Electrical High row capacity and high gain Excellent ow control rangeability Heavy post guided single seated control valves Anti-cavitation / low noise trims Wide range of interchangeable trim range available Tight shut-off and soft seated options Angle body available optionally Low emission gland packing available optionally
Applications Offers ne control for liquids, oils, gases and steam Boiler feed water, Low pressure and High pressure steam High pressure, high temperature & high pressure drop applications Suitable for uids like Oxygen, Chlorine, Thermic uid and Sea water Used in Energy, Nuclear, Fertilizer, Chemical and Petrochemical Sector
Design ASME B16.34
Valve Size 15 to 450 mm ( ½" to 18" )
Rating ANSI 150 # to 2500# or Equivalents to BS, DIN, IS, JIS, etc.
Face to Face ISA 75.03 1985 up to 600#, ISA S.75.16 900# and above
End Connection Flanged, Screwed, Butt Weld, Socket weld, T&G
Body Material Carbon Steel, Chrome- moly steel , Stainless Steel , Monel, Alloy 20 Hastelloy 'C', Nickel
Type of Bonnet Standard between-20°C to 250°C, Normalizing ( Finned ) Between 250 ˚C to 500˚C Extended cold service -20˚C to -200˚C, Extended Bellow Seals
Gland Packing Grafoil / PTFE V rings
Trim Design Top Guided Contoured, Micro Splined Flow, V-Ported (Balanced / Unbalanced), Low Noise ( LN1,LN2,LN3,LN4)
Trim Material Stainless Steel, Alloy 20, Monel, Hastelloy B/C, Stellite (Alloy 6), Nickel
Characteristic Equal Percentage, Linear and Quick Opening.
Seat leakage As per FCI -70-2 ( ANSI B 16.104 ) Class III, IV,V and VI (Standard Leakage rates) Metal to Metal Seating Class IV, Less than 0.01% of rated Cv Metal to Soft Seating -Bubble Tight (Zero Leakage)
Actuator Type Diaphragm, Cylinder or Electric
Actuator Action Direct / Reverse Acting
Diaphragm Nitrile / Neoprene
Spring Range 3-15 Psig (0.2 -1.0 kg/ cm²), 6-30 Psig (0.4-2.0 kg/ cm²)
Air supply 20-35 Psig (1.4-2.5 kg/ cm²)
Air Connection ¼" or ½ " NPT
Hand wheel Top or Side Mounted Handwheel
Globe-Control-Valve_series-2200.jpg
Series 2200
Size ½” (15 mm) to 20” (500 mm)
Rating ANSI 150# to 2500# (Other standards available on request)
Design Code ASME B16.34
Features Precision control Emission free High powered actuator available Pneumatic as well as Electrical High row capacity and high gain Excellent row control rangeability Heavy post guided single seated control valves Anti-cavitation / low noise trims Wide range of interchangeable trim range available Tight shut-off and soft seated options Angle body available optionally Low emission gland packing available optionally
Applications Offers one control for liquids, oils, gases and steam Boiler feed water, Low pressure and High pressure steam High pressure, high temperature & high pressure drop applications Suitable for fuids like Oxygen, Chlorine, Thermic uid and Sea water Used in Energy, Nuclear, Fertilizer, Chemical and Petrochemical Sector
Design ASME B16.34
Valve Size 15 to 450 mm ( ½" to 18" )
Rating ANSI 150 # to 2500# or Equivalents to BS, DIN, IS, JIS, etc.
Face to Face ISA 75.03 1985 up to 600#, ISA S.75.16 900# and above
End Connection Flanged, Screwed, Butt Weld, Socket weld, T&G
Body Material Carbon Steel, Chrome- moly steel , Stainless Steel , Monel, Alloy 20 Hastelloy 'C', Nickel
Type of Bonnet Standard between-20°C to 250°C, Normalizing ( Finned ) Between 250 ˚C to 500˚C Extended cold service -20˚C to -200˚C, Extended Bellow Seals
Gland Packing Grafoil / PTFE V rings
Trim Design Top Guided Contoured, Micro Splined Flow, V-Ported (Balanced / Unbalanced), Low Noise ( LN1,LN2,LN3,LN4)
Trim Material Stainless Steel, Alloy 20, Monel, Hastelloy B/C, Stellite (Alloy 6), Nickel
Characteristic Equal Percentage, Linear and Quick Opening.
Seat leakage As per FCI -70-2 ( ANSI B 16.104 ) Class III, IV,V and VI (Standard Leakage rates) Metal to Metal Seating Class IV, Less than 0.01% of rated Cv Metal to Soft Seating -Bubble Tight (Zero Leakage)
Actuator Type Diaphragm, Cylinder or Electric
Actuator Action Direct / Reverse Acting
Diaphragm Nitrile / Neoprene
Spring Range 3-15 Psig (0.2 -1.0 kg/ cm²), 6-30 Psig (0.4-2.0 kg/ cm²)
Air supply 20-35 Psig (1.4-2.5 kg/ cm²)
Air Connection ¼" or ½ " NPT
Hand wheel Top or Side Mounted Handwheel
Globe-Control-Valve_series-2200.jpg
Series 2200-BS
Size ½” (15 mm) to 12” (300 mm)
Rating ANSI 150#, 300# & 600#
Design Code ASME B16.34 Bellow seal is the additional feature for leak-proof packing in single seated Globe 2 way and 3 way valves
Features Emission free Zero leakage from gland packing Bellows are of stainless steel, Monel, Hastelloy C & Inconel to withstand high temperature, pressure & highly corrosive applications
Applications Suitable for Ammonia, Chlorine, Hydrogen and various acids Suitable for hazardous and corrosive applications Suitable for Hot oils like Dowtherm, Therminol, Santotherm Suitable for Sulphur
Design ASME B16.34
Valve Size 15 to 450 mm ( ½" to 18" )
Rating ANSI 150 # to 2500# or Equivalents to BS, DIN, IS, JIS, etc.
Face to Face ISA 75.03 1985 up to 600#, ISA S.75.16 900# and above
End Connection Flanged, Screwed, Butt Weld, Socket weld, T&G
Body Material Carbon Steel, Chrome- moly steel , Stainless Steel , Monel, Alloy 20 Hastelloy 'C', Nickel
Type of Bonnet Standard between-20°C to 250°C, Normalizing ( Finned ) Between 250 ˚C to 500˚C Extended cold service -20˚C to -200˚C, Extended Bellow Seals
Gland Packing Grafoil / PTFE V rings
Trim Design Top Guided Contoured, Micro Splined Flow, V-Ported (Balanced / Unbalanced), Low Noise ( LN1,LN2,LN3,LN4)
Trim Material Stainless Steel, Alloy 20, Monel, Hastelloy B/C, Stellite (Alloy 6), Nickel
Characteristic Equal Percentage, Linear and Quick Opening.
Seat leakage As per FCI -70-2 ( ANSI B 16.104 ) Class III, IV,V and VI (Standard Leakage rates) Metal to Metal Seating Class IV, Less than 0.01% of rated Cv Metal to Soft Seating -Bubble Tight (Zero Leakage)
Actuator Type Diaphragm, Cylinder or Electric
Actuator Action Direct / Reverse Acting
Diaphragm Nitrile / Neoprene
Spring Range 3-15 Psig (0.2 -1.0 kg/ cm²), 6-30 Psig (0.4-2.0 kg/ cm²)
Air supply 20-35 Psig (1.4-2.5 kg/ cm²)
Air Connection ¼" or ½ " NPT
Hand wheel Top or Side Mounted Handwheel
Globe-Control-Valve_series-2200.jpg
Series 2200-BS(Manual)
Size ½” (15 mm) to 12” (300 mm)
Rating ANSI 150#, 300# & 600#
Design Code ASME B16.34 Bellow seal is the additional feature for leak-proof packing in single seated Globe 2 way and 3 way valves
Features Emission free Zero leakage from gland packing Bellows are of stainless steel, Monel, Hastelloy C & Inconel to withstand high temperature, pressure & highly corrosive applications
Applications Suitable for Ammonia, Chlorine, Hydrogen and various acids Suitable for hazardous and corrosive applications Suitable for Hot oils like Dowtherm, Therminol, Santotherm Suitable for Sulphur
Design ASME B16.34
Valve Size 15 to 300 mm ( ½" to 12" )
Rating ANSI 150 # to 600# or Equivalents to BS, DIN, IS, JIS, etc.
Face to Face ISA 75.03 1985 up to 600#
End Connection Flanged, Screwed, Butt Weld, Socket weld, T&G
Body Material Carbon Steel, Chrome- moly steel , Stainless Steel , Monel, Alloy 20 Hastelloy 'C', Nickel
Type of Bonnet Normalizing ( Finned ) Between 250 ˚C to 500˚C, Extended Bellow Seals
Gland Packing Grafoil / PTFE V rings
Trim Design Top Guided Contoured, Micro Splined Flow, V-Ported (Balanced / Unbalanced), Low Noise ( LN1,LN2,LN3,LN4)
Trim Material Stainless Steel, Alloy 20, Monel, Hastelloy B/C, Stellite (Alloy 6), Nickel
Characteristic Equal Percentage, Linear and Quick Opening.
Seat leakage As per FCI -70-2 ( ANSI B 16.104 ) Class III, IV,V and VI (Standard Leakage rates) Metal to Metal Seating Class IV, Less than 0.01% of rated Cv Metal to Soft Seating -Bubble Tight (Zero Leakage)
Actuator Type Diaphragm, Cylinder or Electric
Actuator Action Direct / Reverse Acting
Diaphragm Nitrile / Neoprene
Spring Range 3-15 Psig (0.2 -1.0 kg/ cm²), 6-30 Psig (0.4-2.0 kg/ cm²)
Air supply 20-35 Psig (1.4-2.5 kg/ cm²)
Air Connection ¼" or ½ " NPT
Hand wheel Top or Side Mounted Handwheel
Globe-Control-Valve_series-2200.jpg
Series 2200-BS ECD
Size ½” (15 mm) to 8” (200 mm)
Rating ANSI 150# to 600#(Other standards available on request)
Design Code ASME B16.34
Features Uniflow developed complete range of control valves these valves are normally equipped with linear Actuators Zero emission Valve meets requirements of Euro Chlor / Chlorine Institute Pamphlet 6 standard Bellows fully housed in an extended bonnet for protection against erosion Stem Sealed by multiwall, hydroformed bellows guaranteed for 50,000 Nos life cycles Fully entrapped Body-Bonnet gasket ensures joint integrity Added safety sealing to atmosphere by means of additional stuffing Box Recommended for applications where bellows has to be flushed by flow in case of risk of polymerization, crystallization
Applications Designed for critical service applications involving lethal, toxic, corrosive, inflammable, volatile, radiating fluids Dry chlorine (CL2) Service temperature -40°C to 120°C/ -40°F to 248°C Anhydrous Hydrogen Chloride (HCL) Anhydrous Hydrofluoric Acid (HF) Phosgene (COCL2) Vinyl Chloride Monomer (VCM) Ethylene Dichloride (EDC) Isocyanates (smI, TDI, HDI etc) Industries like Nuclear Fuel, pesticides Insecticides, polycarbonates polyurethane, PVC
Globe-Control-Valve_series-2200.jpg
Series 2200-BS ECD Manual
Size ½” (15 mm) to 8” (200 mm)
Rating ANSI 150# to 600#(Other standards available on request)
Design Code ASME B16.34
Features Uniflow developed complete range of control valves these valves are normally equipped with linear Actuators Zero emission Valve meets requirements of Euro Chlor / Chlorine Institute Pamphlet 6 standard Bellows fully housed in an extended bonnet for protection against erosion Stem Sealed by multiwall, hydroformed bellows guaranteed for 50,000 Nos life cycles Fully entrapped Body-Bonnet gasket ensures joint integrity Added safety sealing to atmosphere by means of additional stuffing Box Recommended for applications where bellows has to be flushed by flow in case of risk of polymerization, crystallization
Applications Designed for critical service applications involving lethal, toxic, corrosive, inflammable, volatile, radiating fluids Dry chlorine (CL2) Service temperature -40°C to 120°C/ -40°F to 248°C Anhydrous Hydrogen Chloride (HCL) Anhydrous Hydrofluoric Acid (HF) Phosgene (COCL2) Vinyl Chloride Monomer (VCM) Ethylene Dichloride (EDC) Isocyanates (smI, TDI, HDI etc) Industries like Nuclear Fuel, pesticides Insecticides, polycarbonates polyurethane, PVC
Design ASME B16.34
Valve Size 15 to 300 mm ( ½" to 12" )
Rating ANSI 150 # to 600# or Equivalents to BS, DIN, IS, JIS, etc.
Face to Face ISA 75.03 1985 up to 600#
End Connection Flanged, Screwed, Butt Weld, Socket weld, T&G
Body Material Carbon Steel, Chrome- moly steel , Stainless Steel , Monel, Alloy 20 Hastelloy 'C', Nickel
Type of Bonnet Normalizing ( Finned ) Between 250 ˚C to 500˚C, Extended Bellow Seals
Gland Packing Grafoil / PTFE V rings
Trim Design Top Guided Contoured, Micro Splined Flow, V-Ported (Balanced / Unbalanced), Low Noise ( LN1,LN2,LN3,LN4)
Trim Material Stainless Steel, Alloy 20, Monel, Hastelloy B/C, Stellite (Alloy 6), Nickel
Characteristic Equal Percentage, Linear and Quick Opening.
Seat leakage As per FCI -70-2 ( ANSI B 16.104 ) Class III, IV,V and VI (Standard Leakage rates) Metal to Metal Seating Class IV, Less than 0.01% of rated Cv Metal to Soft Seating -Bubble Tight (Zero Leakage)
Actuator Type Diaphragm, Cylinder or Electric
Actuator Action Direct / Reverse Acting
Diaphragm Nitrile / Neoprene
Spring Range 3-15 Psig (0.2 -1.0 kg/ cm²), 6-30 Psig (0.4-2.0 kg/ cm²)
Air supply 20-35 Psig (1.4-2.5 kg/ cm²)
Air Connection ¼" or ½ " NPT
Hand wheel Top or Side Mounted Handwheel
Globe-Control-Valve_series-2200.jpg
Series 2201-BS
Size 1” (25 mm) to 4” (100 mm)
Rating ANSI 150# & Equivalent
Design Code ASME B16.34
Features Emission free Superior long term performance and maximum corrosion resistance in pure chemical service All wetted parts are machined from iso-statically virgin PTFE Lining Lining thickness is maintained minimum 3.5mm to 4mm for long lasting life of valve PFA/FEP lined body assembly provides corrosion protection Heavy duty PTFE bellows design has an enhanced resistance to permeation Use of expensive alloys is not necessary hence design becomes economical Alternate options for the valves made from exotic special materials like Monel, Hastelloy, Tantalum, Nickel etc. All wetted parts checked with spark testing 20 KVA
Applications Corrosive chemical use, including most hazardous and toxic uids Ultimate performance handling Chlorine (Wet & Dry) and Bromine Hydrochloric, Sulphuric, Nitric and Hydrouoric acids Industrial reagents, Alkaline and strong basic uids and most organics
Design ASME B16.34
Valve Size 20 to 100 mm (¾ " TO 4" )
Rating ANSI 150 #
End Connection Flanged
Body Connection Carbon steel with PFA lined
Lining Material Teflon (FEP) /PFA/PVDF
Bellow PTFE (Heavy Duty Bellows- PN 16)
Plug, seat ring Carbon filled PTFE or Glass Filled PTFE
Gland Packing Double PTFE Rings (Optional triple gland packing )
Bushing Stainless steel
Lining Thickness 3.5 mm to 5.0 mm
Services Teflon (PFA) Max. 200˚c , Teflon (FEP) max.160˚c
Bonnet Standard
Trim Designs Top guided contoured, Micro Splined Flow
Characteristics Equal percentage , Linear and On - Off
Seat leakage Class VI As per FCI-70-2 ( ANSI B16.104)
Actuator type Diaphragm, Cylinder or Electric
Spring rang 3 - 15 Psig (0.2-1.0 Kg/cm²) 6 - 30 Psig (0.4-2.0 Kg/cm²)
Air supply 20 - 35 Psig ( 1.4-2.5 Kg/cm²)
Air connection ¼" or ½" NPT
Hand wheel Top or Side Mounted Handwheel
Globe-Control-Valve_series-2200.jpg
Series 2201-BS (Manual)
Size 1” (25 mm) to 4” (100 mm)
Rating ANSI 150# & Equivalent
Design Code ASME B16.34
Features Emission free Superior long term performance and maximum corrosion resistance in pure chemical service All wetted parts are machined from iso-statically virgin PTFE Lining Lining thickness is maintained minimum 3.5mm to 4mm for long lasting life of valve PFA/FEP lined body assembly provides corrosion protection Heavy duty PTFE bellows design has an enhanced resistance to permeation Use of expensive alloys is not necessary hence design becomes economical Alternate options for the valves made from exotic special materials like Monel, Hastelloy, Tantalum, Nickel etc. All wetted parts checked with spark testing 20 KVA
Applications Corrosive chemical use, including most hazardous and toxic uids Ultimate performance handling Chlorine (Wet & Dry) and Bromine Hydrochloric, Sulphuric, Nitric and Hydrouoric acids Industrial reagents, Alkaline and strong basic uids and most organics
Design ASME B16.34
Valve Size 20 to 100 mm (¾ " TO 4" )
Rating ANSI 150 #
End Connection Flanged
Body Connection Carbon steel with PFA lined
Lining Material Teflon (FEP) /PFA/PVDF
Bellow PTFE (Heavy Duty Bellows- PN 16)
Plug, seat ring Carbon filled PTFE or Glass Filled PTFE
Gland Packing Double PTFE Rings (Optional triple gland packing )
Bushing Stainless steel
Lining Thickness 3.5 mm to 5.0 mm
Services Teflon (PFA) Max. 200˚c , Teflon (FEP) max.160˚c
Bonnet Standard
Trim Designs Top guided contoured, Micro Splined Flow
Characteristics Equal percentage , Linear and On - Off
Seat leakage Class VI As per FCI-70-2 ( ANSI B16.104)
Actuator type Diaphragm, Cylinder or Electric
Actuator action Direct /Reverse Acting
Spring rang 3 - 15 Psig (0.2-1.0 Kg/cm²) 6 - 30 Psig (0.4-2.0 Kg/cm²)
Air supply 20 - 35 Psig ( 1.4-2.5 Kg/cm²)
Air connection ¼" or ½" NPT
Hand wheel Top or Side Mounted Handwheel
Globe-Control-Valve_series-2200.jpg
Series 2202 – MH
Size ½” (15 mm) to 6” (150 mm)
Rating ANSI 150# to 300# & Equivalent
Design Code ASME B16.34
Features Unibody PTFE construction minimizes potential leak paths Isostatically compacted, high density PTFE body Inherent ow characteristics All wetted parts are machined from iso-statically virgin PTFE Low emission gland packing available optionally
Applications Vacuum service Highly corrosive uids Most organics
Design ASME B16.34
Valve Size 15 to 150 mm (½" to 6")
Rating ANSI 150# & 300#
End Connection Flanged
Body Connection Total PTFE +Metal Housed (CS / SS)
Lining Material Teflon (FEP) /PFA/PVDF
Gland Packing Double PTFE Rings ( Optional Triple Gland Packing )
Plug, seat ring Carbon Filled Teflon , Glass Filled Teflon
Stem Stainless steel + PTFE Sleeve
Bonnet Standard
Trim Designs Teflon ( PFA) max.200˚C, Teflon ( FEP) max 160˚C
Characteristic Equal Percentage, Linear and On-Off
Trim Designs Top guided contoured, Micro Splined Flow
Characteristics Equal percentage , Linear and On - Off
Seat leakage Class VI As per FCI-70-2 ( ANSI B16.104)
Actuator type Diaphragm, Cylinder or Electric
Actuator action Direct /Reverse Acting
Spring rang 3 - 15 Psig (0.2-1.0 Kg/cm²) 6 - 30 Psig (0.4-2.0 Kg/cm²
Air supply 20 - 35 Psig ( 1.4-2.5 Kg/cm²)
Air connection ¼" or ½" NPT
Hand wheel Top or Side Mounted Hand wheel
Globe-Control-Valve_series-2200.jpg
Series 2200-CR
Size ½” (15 mm) to 8” (200 mm)
Rating ANSI 150# to 600#
Design Code ASME B16.34
Features Cryogenic Spring Loaded Seal Ring Stable Control Cost Effective Operation Economical & Easy Maintenance Cryogenic Design Features Fugitive Emission Protection
Applications Cryogenic Valves are specially designed for Cryogenic service. The construction is same as standard Globe Control Valve with exception of the extension bonnet to keep the cryogenic liquid out of the packing area allowing building of gas in the warmer bonnet area. These cryogenic valves are designed to provide precise control of liquids and gases at cryogenic temperature of -198ºC (-325ºF).
Design ASME B16.34
Valve Size 15 to 200 mm ( ½" to 8" )
Rating ANSI 150 # to 600# or Equivalents to BS, DIN, IS, JIS, etc.
Face to Face ISA 75.03 1985 up to 600#
End Connection Flanged, Screwed, Butt Weld, Socket weld, T&G
Body Material Carbon Steel, Chrome- moly steel , Stainless Steel , Monel, Alloy 20 Hastelloy 'C', Nickel
Type of Bonnet Extended cold service -20˚C to -200˚C
Gland Packing Grafoil / PTFE V rings
Trim Design Top Guided Contoured, Micro Splined Flow, V-Ported (Balanced / Unbalanced), Low Noise ( LN1,LN2,LN3,LN4)
Trim Material Stainless Steel, Alloy 20, Monel, Hastelloy B/C, Stellite (Alloy 6), Nickel
Characteristic Equal Percentage, Linear and Quick Opening.
Seat leakage As per FCI -70-2 ( ANSI B 16.104 ) Class III, IV,V and VI (Standard Leakage rates) Metal to Metal Seating Class IV, Less than 0.01% of rated Cv Metal to Soft Seating -Bubble Tight (Zero Leakage)
Actuator Type Diaphragm, Cylinder or Electric
Actuator Action Direct / Reverse Acting
Diaphragm Nitrile / Neoprene
Spring Range 3-15 Psig (0.2 -1.0 kg/ cm²), 6-30 Psig (0.4-2.0 kg/ cm²)
Air supply 20-35 Psig (1.4-2.5 kg/ cm²)
Air Connection ¼" or ½ " NPT
Hand wheel Top or Side Mounted Handwheel
Air connection ¼" or ½" NPT
Hand wheel Top or Side Mounted Hand wheel
Globe-Control-Valve_series-2200.jpg
Series 2200-CR (Mnual)
Size ½” (15 mm) to 8” (200 mm)
Rating ANSI 150# to 600#
Design Code ASME B16.34
Features Cryogenic Spring Loaded Seal Ring Stable Control Cost Effective Operation Economical & Easy Maintenance Cryogenic Design Features Fugitive Emission Protection
Applications Cryogenic Valves are specially designed for Cryogenic service. The construction is same as standard Globe Control Valve with exception of the extension bonnet to keep the cryogenic liquid out of the packing area allowing building of gas in the warmer bonnet area. These cryogenic valves are designed to provide precise control of liquids and gases at cryogenic temperature of -198ºC (-325ºF).
Design ASME B16.34
Valve Size 15 to 200 mm ( ½" to 8" )
Rating ANSI 150 # to 600# or Equivalents to BS, DIN, IS, JIS, etc.
Face to Face ISA 75.03 1985 up to 600#
End Connection Flanged, Screwed, Butt Weld, Socket weld, T&G
Body Material Carbon Steel, Chrome- moly steel , Stainless Steel , Monel, Alloy 20 Hastelloy 'C', Nickel
Type of Bonnet Extended cold service -20˚C to -200˚C
Gland Packing Grafoil / PTFE V rings
Trim Design Top Guided Contoured, Micro Splined Flow, V-Ported (Balanced / Unbalanced), Low Noise ( LN1,LN2,LN3,LN4)
Trim Material Stainless Steel, Alloy 20, Monel, Hastelloy B/C, Stellite (Alloy 6), Nickel
Characteristic Equal Percentage, Linear and Quick Opening.
Seat leakage As per FCI -70-2 ( ANSI B 16.104 ) Class III, IV,V and VI (Standard Leakage rates) Metal to Metal Seating Class IV, Less than 0.01% of rated Cv Metal to Soft Seating -Bubble Tight (Zero Leakage)
Actuator Type Diaphragm, Cylinder or Electric
Actuator Action Direct / Reverse Acting
Diaphragm Nitrile / Neoprene
Spring Range 3-15 Psig (0.2 -1.0 kg/ cm²), 6-30 Psig (0.4-2.0 kg/ cm²)
Air supply 20-35 Psig (1.4-2.5 kg/ cm²)
Air Connection ¼" or ½ " NPT
Hand wheel Top or Side Mounted Handwheel
Globe-Control-Valve_series-2200.jpg
Series 3300
Size ½” (15 mm) to 12” (300 mm)
Rating ANSI 150# to 600# (Other standards available on request)
Design Code ASME B16.34
Features Mixing / Diverting application High ow capacity High rangeability Bellows are available optionally of stainless steel, Monel, Hastelloy C & Inconel to withstand high temperature, pressure & highly corrosive applications
Applications Textile industries application Thermic uids (Dowtherm, Therminnol, Santotherm) Pharmaceutical applications
Design ASME B16.34
Body Design Globe Type With Tail Piece to provide Third Port
Valve Size 15mm to 400mm (½" to 16")
Rating ANSI 150 to 600 or Equivalent to BS, DIN, IS, JIS.
End Connection Flanged -15mm to 400mm (½" to 16" ) Screwed-15mm to 50mm (½" to 2" )
Body Material Carbon Steel, Stainless Steel, Monel, Alloy 20, Hastelloy B/C etc.
Bonnet Standard between-20°C to 250°C Normalizing (Finned) Between 250°C to 500°C Extended Bellow seal For Cold Service -20°C to -200°C
Gland Packing Grafoil /PTFE V -Rings
Trim Design Skirt Guided, Linear, Pressure Balance
Trim Material Stainless Steel, Alloy 20, Monel, Hastelloy B/C, Stellite Hard Facing.
Characteristic Linear, On-Off.
Seat leakage As Per FCI - 70 - 2 Class IV, V , and VI (Standard Leakage Rates ) Metal to Soft Seating Bubble Tight ( Zero Leakage )
Actuator Type Diaphragm, Cylinder or Electric.
Actuator Action Direct / Reverse Acting. Direct Acting air failure "Close" Top Port. Reverse Acting air failure "Open" Top Port.
Diaphragm Nitrite / Neoprene
Spring Range 3 - 15 Psig(0.2 - 1.0 Kg/cm² ) , 6 - 30 Psig (0.4 - 2.0 Kg / cm² )
Air supply 20 - 35 Psig (1.4 - 2.5 Kg / cm ² )
Air Connection ¼" or ½" NPT
Hand wheel Top or Side Mounted Hand wheel
Globe-Control-Valve_series-2200.jpg
Series 2200-RCV
Size ¼” (6 mm), ½” (15 mm) to 1” (25 mm)
Rating ANSI 150#, 300# & Equivalent
Features Compact design and light weight Wide range of inter changeable trim Bellow Stem Seal Precise control Guided trim Threaded Bonnet for quick assembly
Applications Widely used for Nuclear applications Widely used for research and process pilot plant on liquids, gases or steam to control fractional ows in smaller pipes. Its compact size makes it an ideal choice for additional injection, sampling or low ow Hydraulic system Suitable for sticky uids and corrosive atmosphere
Design ASME B16.34
Valve Size 6 to 25 mm ( ¼" to 1" )
Rating ANSI 150 # & 300# & Equivalents
End Connection Screwed, Butt Weld, Socket weld
Body Material Carbon Steel, Chrome- moly steel , Stainless Steel , Monel, Alloy 20 Hastelloy 'C', Nickel
Type of Bonnet Extended Bellow Seals, Extended cold service -20˚C to -200˚C
Globe-Control-Valve_series-2200.jpg
Series 2200-M
Size ¼” (6 mm), ½” (15 mm) & ¾” (20 mm)
Rating ANSI 150#, 300# & Equivalent
Design Code ASME B16.34
Features Wide range of inter changeable trims Threaded Bonnet for quick assembly Bar stock bodies in exotic material Cooling nned bonnet available for higher temp. Extended Bonnet available for Cryogenic application Compact size Low Emission gland packing available
Applications Widely used for research and process pilot plant on liquids, gases or steam to control fractional ows in smaller pipes. Its compact size makes it an ideal choice for additional injection, sampling or low ow Hydraulic system It is recommended for use wherever precise control is an important factor or where physical constraints limit valve weight or size Suitable for corrosive atmosphere
Design ASME B16.34
Valve Size 6 to 20 mm ( ¼" to ¾" )
Rating ANSI 150 # & 300# & Equivalents
End Connection Screwed, Butt Weld, Socket weld
Body Material Carbon Steel, Chrome- moly steel , Stainless Steel , Monel, Alloy 20 Hastelloy 'C', Nickel
Type of Bonnet Standard between-20°C to 250°C, Normalizing ( Finned ) Between 250 ˚C to 500˚C Extended cold service -20˚C to -200˚C


Get in tuch with us.